AIR COOLED THERMIC FLUID PUMP MANUFACTURER IN AHMEDABAD, GUJARAT, INDIA.

K-TECH FLUID CONTROLS is Thermic Fluid Hot Oil Pump Manufacturer and supplier in special constructions for the circulation of heat Oil Transfer. K-TECH Air-cooled pump designed for high-temperature applications isolate liquid in the motor section of the unit for the hot process fluid in the pump casing with a series of pressure ports located in the front bearing housing or pump casing adapter. This isolated liquid (usually the same fluid as the pumped fluid) is circulated through an air-cooled heat exchanger by an auxiliary impeller located on the rotor assembly.

K-TECHhot oil circulating pump design Allows the motor and bearing environment to be at a much lower temperature than the process fluid, enabling the use of standard bearings and motor insulation significantly reducing both first and long term operating and maintenance costs. K-TECH Pumps are installed in industries like construction, plastic, rubber, chemical, textile, sugar, and food, pharmaceutical.

SPECIFICATION:

• Capacity: up to 300 m3/hr
• Head: up to 150 MLC
• Pump Size: 25 mm to 300 mm
• Speed: 1450 / 2900 rpm at 50 Hz & 3500 rpm at 60 Hz
• Temperature: up to 350 C max

APPLICATION:

• Thermic Fluid Hot Oil Pump for Thermic Fluid handling
• Thermal Oil Pump for Hot Oil Transfer
• Hot oil circulating pump forPlastic Industry
• Thermic Fluid Hot Oil Pump Synthetic Oil Transfer
• Air Cooled Pump for Hot water Supply
• Thermal Oil Pump for Paper Industry
• Thermic Fluid Hot Oil Pump for District Heating System
• Thermal Oil Pump for Mineral Oil Industry
• Thermic Fluid Hot Oil Pump for Various Chemical Industries
• Hot oil circulating pumpTextile Industry
• Edible Thermal Oil Pump for Food Processing Plants
• Hot oil circulating pumpSugar Industries.
• Hot oil circulating pumpPharmaceutical Industries

ADVANTAGES:

Low maintenance.
Without dismantling the suction and the discharge systems “the shaft and other rotating parts can be removed”.
The pump and the motor are connected by means of a flexible coupling on a common base plate.
High strength
Single stage and end suction centrifugal pumps.